How to fix Windows 10 upgrade error 0x8007000d

Error 0x8007000d is one of the update errors you may encounter during the upgrade to Windows 10. The error may also appear while trying to activate the operating system. The error prevents using the new OS and may drive users mad, since it emerges out of blue and seems to be unavoidable. Still, there are methods to fix error 0x8007000d, which we present below.

Windows Update error 0x8007000d

Causes of receiving error code 0x8007000d message

Update error 0x8007000d may appear due to numerous reasons. Though the error message doesn’t give much information about reasons of error grounds, it is likely one of the following. If you see the error being unable to install Windows 10, then probably the file required for update cannot be reached. Another reason of the error can be the problems with Component Based Servicing manifest.

Ways to repair error code 0x8007000d :

Automatic solution

Repairing system errors may be not an easy task, so we should warn you that performing some of the steps may require above-average skills, so if you don’t feel experienced enough, you may apply to automatic tool.

Download Total PC Care

Total PC Care is all-in-one and must-have tool for users who want to forget about numerous system issues like error code 0x8007000d. Aside from fixing error code 0x8007000d, Total PC Care will also automatically resolve other issues boosting your computer speed and stabilizing its performance.

Steps of manual resolving

Solution 1. Use System File Checker

    • Input cmd in search bar
    • Right-click the result and select Run as administrator
    • Type the following commands and hit Enter after each line:

WSReset.exe
dism /online /cleanup-image /restorehealth
dism /online /cleanup-image /StartComponentCleanup
sfc /scannow
powershell
Get-AppXPackage -AllUsers |Where-Object {$_.InstallLocation -like "*SystemApps*"} | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}

  • Restart the computer to see if this fix was halpful

Solution 2. Use the DISM tool.

    • Start the command prompt as described above
    • Type the commands bellow hitting Enter after each line:


DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth

  • Start the update process again

Solution 3. Clear the SoftwareDistribution folder

  • Press Win+R
  • Type services.msc and hit Enter
  • Right-click the Windows Update Service and choose Stop
  • Go to the Windows\SoftwareDistribution directory and remove its contents
    Alternatively, you may rename the folder to \Windows\SoftwareDistributionOld
  • Start the Windows Update Service
  • Try to update again

Solution 4. Use Group Policy Editor

  • Press Win+R
  • Input gpedit.msc and hit Enter
  • Choose Computer Configuration, then Administrative Templates
  • Select System
  • Double-click the Specify settings for optional component installation and component repair option
  • Select Enabled and Contact Windows Update directly…
  • Click OK
  • Restart the update

Clean boot for Windows operating systems

Clean boot in Windows 8 and Windows 10

To perform a clean boot in Windows 8 or Windows 10:

  1. Press the “Windows + R” key to open a Run box.
  2. Type msconfig and click OK.
  3. On the General tab, click Selective startup.
  4. Clear the Load startup items check box.
  5. Click the Services tab.
  6. Select the Hide all Microsoft services check box (at the bottom).
  7. Click Disable all.
  8. Click the Startup tab.
  9. Click Open Task Manager.
  10. On the Startup tab, right-click each enabled startup item and select Disable.
  11. Click OK.
  12. Click Restart.

After completing your troubleshooting, restore your system by doing the following:

  1. Press the “Windows + R” key to open a Run box.
  2. Type msconfig and click OK.
  3. On the General tab, select Normal startup.
  4. Click the Services tab.
  5. Clear the Hide all Microsoft services check box.
  6. Click Enable all.
  7. Click the Startup tab.
  8. Click Open Task Manager and enable all of your startup programs.
  9. Click OK.
  10. Click Restart.

NOTE: Be sure you “Enable all” Microsoft services when you are done troubleshooting, and re-enable all programs in the Startup tab, or will you lose some OS functions (ex. internet connection) and some applications won’t get loaded during startup.


Clean boot in Windows 7 and Vista

To perform a clean boot in Windows 7 or Vista:

  1. Click Start and type msconfig in the search box.
  2. Press Enter.
  3. On the General tab, click Selective startup.
  4. Clear the Load startup items check box.
  5. Click the Services tab.
  6. Select the Hide all Microsoft services check box (at the bottom).
  7. Click Disable all.
  8. Click OK.
  9. Click Restart.

After completing your troubleshooting, restore your system by doing the following:

  1. Click Start and type msconfig in the search box.
  2. Press Enter.
  3. On the General tab, select Normal startup.
  4. Click OK.
  5. Click Yes when asked to restart your computer.

Clean boot in Windows XP

To perform a clean boot in Windows XP:

  1. Click Start > Run, type msconfig and then click OK.
  2. On the General tab, choose Selective Startup.
  3. Clear the following check boxes:
    • Process SYSTEM.INI file
    • Process WIN.INI file
    • Load Startup items
  4. Click the Services tab.
  5. Select the Hide All Microsoft services check box (at the bottom).
  6. Click Disable all.
  7. Click OK.
  8. Click Restart.

After completing your troubleshooting, restore your system by doing the following:

  1. Click Start > Run, type msconfig and then click OK.
  2. On the General tab, select Normal Startup.
  3. Click OK.
  4. Click YES when asked to restart your computer.

How to Fix Slow Running Windows 10

If you’re running Windows 10 on your computer or laptop and feeling very irritated because of its sluggish performance? Don’t worry! In this article, you will check out some useful tricks and workarounds that will definitely help you to fix slow running Windows 10 PC and will boost overall speed of your system.

After making the following changes on your Windows 10 PC, you will notice the change and enjoy the speed of your owned PC running Windows 10 into it. So without further delay, why don’t you start checking these tips to fix slow running windows  10.

How to Fix Slow Running Windows 10

Here goes the first one:

Disable Animations and Effects

Improvisation, making things more interesting and attractive lead to more energy consumption. Here, Windows has improved a lot in terms of attractiveness then simultaneously, it uses more power, extra RAM space and slows down the functionality.

 

Follow below the mentioned steps to disable the animations and effects to improve the performance of your PC.

1. Launch RUN dialog box using WIN + R keyboard shortcut. Type sysdm.cpl and click OK.

2. System properties window will pop up. Here switch to Advanced tab, and then click on the Settings button which you can see under Performance section.

A new window will appear on which you can choose the settings you want to use for the appearance and performance of Windows 10 on this computer

disable-animations-and-effects

3. In this window, click on Custom radio button and uncheck all the settings except the second one “Animate windows when minimizing and maximizing” (shown in the following image). Click on Apply button to make changes.

Remove Unwanted Startup programs

Did you know there are many unnecessary programs which start up with windows and slow down the system performance?

Yes, there are such programs but no need to worry about it as they can be disabled. Disabling such programs is a very easy task with the below steps.

1. Open Task Manager by right-clicking on the Start button and from the options click on Task Manager to launch it.

Or use the Ctrl+Shift+Esc keyboard shortcut altogether to launch it quickly

 

2. Click on Startup tab and choose unwanted startup programs from the list and hit disable button to disable these startup programs.

3. Now, you need to restart your computer to apply the changes. (You can restart later after doing everything mentioned in this article.)

remove-unwanted-startup-programs

You will definitely notice the change in the processing speed of your Windows 10 PC.

Disable unnecessary features from folder option

You will find this idea very useful and fruitful when once you try this on your system. With my experience, I would advise you to follow this step which will lead to speed up the processing of files and folders.

1. Launch the File Explorer -> This PC  and click on the “View” tab which you will find in Ribbon.

folder-options

2. It will launch the Folder Options window. Here you need to click on the Options which is listed at the end.

Alternatively, you can also search Folder Options in the Start menu search bar and when you see it in search click to launch it quickly.

3. It will launch the another File Explorer Options window. You need to switch to “View” tab in this window and untick the following options:

  • Display file size information in folder tips.
  • Hide empty drives.
  • Hide extensions for known file types.
  • Hide folder merge conflicts.
  • Show encrypted or compressed NTFS files in color.
  • Show pop-up description for folder and desktop items.

Fix Slow Running Windows 10

4. Once done, click on Apply button and then OK.

Disable Transparency on Taskbar, Action Center and Start Menu

If you love performance more than looks then should try this option. Microsoft introduces the transparency feature in Windows 7 and improvises for Windows 10 to maintain the beauty factor. You can disable this by using simple steps mentioned below. Try this out:

1. Launch the Settings apps from the Start Menu of Windows 10. Or you can press WIN + I shortcut keys to quickly launch the Settings app window.

2. After that click on the Personalization and then click on the Colors options on the left panel. On the right pane, look for

On the right pane, look for “Make Start, taskbar, and action center transparent” this setting and turn it off.

color-settings-in-windows-10

Vacant Memory in Hard Drive using Disk Cleanup Utility

This is one of the useful information which every Windows 10 users must know. The operating system also uses some part of system hard drive to keep the performance balance.

In this case, the system memory will burst out, which in return cause issues. So it is highly advisable to maintain least ten percent of the total space free to maintain the performance.

So, remove data which is not required, make a backup of movies, photos, and videos on an external drive.

To remove temporary and other unnecessary files, make a habit of using Disk Cleanup utility.

  1. Search for Disk Cleanup from the Start Menu. Click on the Disk Cleanup utility in search results to launch it.
  2. A little pop-up will appear asking you to select the drive from which you want to clear unnecessary and temporary files
  3. Click OK and it will start calculating how much space you can free.
  4. Another window will come up. Here you need to click OK.

Fix Slow Running Windows 10

In case, you want to see some advanced options, then you can click on “Clean Up System files” button -> Select the files which you want to clear and click OK.

Hardware Up gradation

Time passes, we grow and growth is required in every part. Only up gradation of software and operation system will not help you in improving the system performance. The hardware needs to match the requirement of upgraded software. We have the solution to fix such issue by using external RAM modules and Hard Drives. This solution can give your system another few years of life. However, we suggest

We have the solution to fix such issue by using external RAM modules and Hard Drives. This solution can give your system another few years of life. However, we suggest you to upgrade the system hardware time to time as well.

To find out your system information. You can simply search “System information” and when the same option appears in the search result click to launch it. Under System summary, you will find out all the details about your system. Also, you will get an idea what hardware is outdated.

system-information

Also, the minimum system requirement for installing Windows 10 according to Microsoft is as follow:

  • Latest OS: You must be running Windows 7, 8 or 8.1 on your system
  • Processor: 1 gigahertz (GHz) or faster processor or SoC
  • RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit OS.
  • Hard disk space: 16 GB for 32-bit OS 20 GB for 64-bit OS
  • Graphics card: DirectX 9 or later with WDDM 1.0 drive
  • Display: 800×600

windows-10-minimum-requirements

Disable Sound Notifications

I love the notification sound of my laptop when it reminds me the low battery power but I do not like it much when it is not required such as while plugging or unplugging the pen drive. You can disable the all or some of these sound notifications.

1. In the Start menu search bar, type Sounds and from the search results click on “Change system sound” to open it.

Alternatively, Make a right click on the Sound icon in the notification area at the bottom-right side of the screen and from the options click on Sounds to launch the system sounds setting window.

2. In the Sound window, choose None from sounds dropdown list after selecting the desired program which you want to disable.

sound-settings

In case, you wish to disable the sounds from all notification then you can also choose No Sounds from Sound Scheme.

Uninstall Unnecessary Modern Apps

You must be aware of the applications installed in your system because, in Windows 10, there are some pre-installed modern apps which keep itself running in the background and hit your system performance. Find few options which can help you in uninstalling the apps.

Actually, there are different ways to uninstall modern apps which are:

  • Uninstall apps using Start Menu
  • Uninstall apps using Settings
  • Uninstall all built-in apps using PowerShell
  • Uninstall all built-in apps using the latest version of CCleaner

Stop Background Data Collection by Configuring Privacy Settings

To make your PC friendlier to you, Operating System collects information regarding you at the backend such as your typing behavior, account information, credentials.

But this is also true that the whole process also affects overall system performance. You can configure the privacy settings in Windows 10 which improves the performance of your system.

Normally, you can manage privacy settings during the time of installation, but in case, you have not done that during the installation, you can still configure privacy settings. Here is what you need to do:

Launch the Settings apps -> Privacy. Here you will find privacy settings for all the components of the Windows 10 operating system. It is up to you which privacy settings you want to disable.

privacy-settings-windows-10

Apart from the above-mentioned tips, there are some other tips which you must follow to improve the overall performance of the Windows 10 PC which are:

  • Make sure to update the Windows version time to time
  • Always install the useful and necessary apps and software. Also, uninstall the one which is of no use.
  • Always use a good antivirus and update it time to time.

So these are some of the tips which you can follow to fix slow running windows 10 PC. Why don’t you give a try to these tips and let us know which you find useful?

How to Remove Shortcut Virus from USB Flash Drive and Computer.

Pendrive, SD Cards or Flash drives are very common device to transfer data from one computer to another, also sometimes we get errors while connecting Pendrive to Computer and during data transfer one of them is Shortcut Error, basically, this is a Virus known as Shortcut virus, it converts every file into shortcut in Pendrive / Hard drive, this article will guide you to remove shortcut virus from your flash drive as well as computer.

What is Shortcut Virus and How does it Spread.

When we connect a flash drive to an infected computer and transfer any file it automatically infect Pendrive and all files shown as Shortcut. This virus can affect any external storage like Flash Drives, External Hard disk, Phone Memory, Memory card or any Memory Stick, this is an anonymous malware which initially released online and spreading from one computer to another and we got Shortcut of files which are in USB drive if you try to open any file you will get error message.

You Can See How Files are Showing in Removable Disk (D:)

 

shortcut-flash-drive-virus

How to Remove Shortcut Virus From Pendrive / USB Drive.

If your USB drive doesn’t have important files you can try to Format it, but if it contains important files then you are not going to format it, to Remove Shortcut Virus follow the Steps Below.

 

Step 1. Go to Start and Search for cmd, as  it appears in start menu Right Click on it and Click “Run as Administrator

Step 2. Navigate to Flash Drive by typing its letter. [ Let’s Say it is i ], to find your USB drive letter open “My Computer” and check for letter, type i: and hit enter.

Step 3. Type ” del *.lnk ” (without quote) in cmd window and Hit Enter on your Keyboard.

Step 4. Now type ” attrib -s -r -h *.* /s /d /l ”  ( without quote ) and hit Enter .

Shortcut Virus Removal

It will take few seconds to recover all your files, Now open your Flash Drive you will get Back all of your files.

How to Remove Shortcut Virus from Computer.

Once you recover files into USB drive you can use them but if you again plug in USB Flash drive into the infected computer your flash drive will infect again, so it is better to remove the source of this virus i,e infected the computer, follow the steps below to remove shortcut virus from the computer.

Step 1. First open Task Manager by pressing Ctrl + Alt + del Or Right Click on the taskbar and click on Task manager.

Step 2. Go to Process tab and look for process Wscript.exe, Scroll down and find any such process, Now Right Click on it and Click on End Task.

Step 3. Now go to Start and search for “regedit“, open it you will get Registry Editor navigate to

 

HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Run

Here look for Registry Key “odwcamszas” if found then right-click on it and delete this registry key. If you don’t find exact registry key then look for similar registry keys and search them on google to know what they do.

remove shortcut virus

This will remove Shortcut Virus from your Computer, if not then try these steps.

1.  Press windows + R key, you will get Run box, type %temp% here and hit OK, now temp folder will be open look for file nkvasyoxww.vbs and delete it.

2. Go to C:\Users\<username>\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup.  Check Startup folder if nkvasyoxww.vbs  exist here then delete it.

shortcut virus delete

3. Press Windows + R key, type “msconfing” into the run dialog box and hit OK, it will open System Configuration, Go to Startup tab, and look for nkvasyoxww.vbs uncheck it from startup and hit OK.

There may be a different name for the VBS file, just make sure you don’t have any file with an unusual name and VBS extension at the startup, registry, and temp folder.

In Windows 8, Open Task Manager and go to Startup tab, disable nkvasyoxww.vbs from here.

Shortcut Virus Removal

This will remove Shortcut Virus from your Computer or Laptop if you face any problem feel free to comment below.

0xc000000f: Error attempting to read the boot configuration data

Get the fix to “0xc000000f: error attempting to read the boot configuration data” boot error for Windows XP, Vista, 7, 8, 8.1 or 10 operating systems.

About the “0xc000000f” error

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Description and Symptoms

The error messages, alerts, warnings, and symptoms below are tied to this error.

Symptom 1: 0xc000000f error screen on startup

As a part of the system startup procedure, the BOOTMGR bootloader first introduced in Windows Vista and used in all later versions of Windows, including Windows 7, Windows 8(.1), and Windows 10, uses a database of entries and configuration options known as the BCD (Boot Configuration Database), which acts as a global store for all boot-related options and settings on newer Windows PCs. However, if the BCD file is not found, then a “0xc000000f” error appears and the boot process is halted.

The following is a screenshot of this error as it appears during the Windows Vista and Windows 7 startup:

Win7 0xc000000f startup error

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: \Boot\BCD

Status: 0xc000000f

Info: An error occurred while attempting to read the boot configuration data.

And here is what this error looks like on Windows 8, Windows 8.1 and Windows 10:

Win8 0xc000000f startup error

Recovery

Your PC needs to be repaired

The Boot Configuration Data for your PC is missing or contains errors.

File: \Boot\BCD
Error code: 0xc000000f

You'll need to use the recovery tools on your installation media. If you don't have any installation media(like a disc or USB device), contact your system administrator or PC manufacturer.

Causes of this Error

This error has been known to occur as a result of one or more of the following:

Cause 1: BCD is missing or corrupt

One of the most common causes of this error is the BCD that became missing or corrupt. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

Cause 2: File system integrity compromised

For the same reasons, the file system itself may become corrupt or damaged. That happens even more often if one turns off a PC while it is in the middle of writing crucial data to the boot sector.

Cause 3: HDD data cable is faulty

Like all components of our PC’s, hard drive data cables tend to deteriorate as the time passes. If the same cable is used for several years(or even across several different computers), then it might be the cause of periodic read/write errors that can affect the loading process.

Fixing “0xc000000f” on Windows

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Fix #1: Rebuild BCD via Easy Recovery Essentials

Easy Recovery Essentials’ one-click automated system repair feature incorporates full repair and reconstruction of the BCD to resolve the “0xc000000f” error, even in cases where Windows won’t boot as a result of the error.

The automated boot repair component of EasyRE will address all BCD-related issues, fixing the BCD or recreating it from scratch using the correct encoding and path for the partition that is refusing to load properly.

Easy Recovery Essentials is guaranteed to fix the “0xc000000f” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

  1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
  2. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
  4. Once EasyRE is running, choose the “Automated Repair” option and click Continue.

    EasyRE Home

    Choose “Automated Repair” in Easy Recovery Essentials

  5. After EasyRE scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.

    EasyRE displays a list of found Windows operating systems

    Choose the drive associated with the Windows installation you’re trying to repair.

  6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE’s repair is fully automated:

    EasyRE: Automated Repair

    Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

  7. Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.
  8. The “0xc000000f” error should now be fixed as your PC begins to load:

    EasyRE: Automated Repair

    Windows, booting up successfully.

You can download Easy Recovery Essentials

Fix #2: Make sure no additional devices are plugged in

Before jumping into the command line or Startup Repair, it’s best to try another restart with the fewest number of devices and external drives plugged into the computer. This will make sure that nothing that was recently added to the computer isn’t causing this issue. It would be best to unplug any recent USB drives, CDs, DVDs etc. This includes a memory card reader too. Make sure that all external drives and USB keys or USB jump drives have been disconnected, then try again.

Fix #3: Use Startup Repair to repair BOOTMGR

On Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10, Startup Repair can be used to scan the system for damaged or missing system files to replace the BCD file if it is corrupt or missing.

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Startup Repair is an automated diagnosis and repair tool that is available from the Windows setup disc and can be used to find and repair some common problems. More information about how Startup Repair operates and what it does can be found in our knowledgebase. The following steps will initiate Startup Repair from the Windows setup disc:

Unable to boot into the Windows setup CD?
See our guide on setting up a PC to boot from the CD or DVD for troubleshooting and more detailed instructions.

  1. Insert your Windows installation DVD into your PC’s CD-ROM drive,
  2. Fully power down your PC, and make sure it has fully shut off,
  3. Power up your PC,
  4. Press any key when you see “Press any key to boot from CD or DVD..”
  5. Click the link titled “Repair your computer” in the bottom-lefthand corner, after first selecting your language and keyboard options.
    Windows 7 setup Install Now dialog, with repair your computer link
  6. Wait for Startup Repair to scan your PC for Windows installations, then select your install from the list it shows:
    Startup repair lists available operating systems to repair.
  7. Choose “Startup Repair” from the list of available recovery options to begin:
    Startup Repair lists all available recovery options, choose a recovery tool
  8. Startup Repair will begin scanning your installation for known issues and will attempt a repair, if possible.
    Windows Startup Repair is searching for problems

Here is an example of what the PC’s startup repair should look like once the BCD file is properly restored:

Missing BCD file restored by Startup Repair

Missing BCD file restored by Startup Repair

Fix #4: Rebuild the BCD manually

Since the boot error is often caused by a missing BCD, rebuilding it is often a good solution.

Here are the steps to rebuild the BCD:

  1. Boot from the Windows install disc
  2. Click on Repair your computer after selecting proper language, time and keyboard input.
  3. Select the Windows installation drive, which is usually C:\, and click Next
  4. Choose Command Prompt when the System Recovery Options box appears
  5. Write the following command and press Enter afterwards:
    bootrec /rebuildbcd
  6. If the program finds a Windows installation and asks whether it should add it to the boot list, press Y

Here is an example screenshot of what the PC’s console output should look like once Bootrec is done rebuilding the BCD.

Bootrec utility results screen

Bootrec utility results screen

Fix #5: Check your data cables, BIOS and drivers

Unplug all HDD data cables, and then plug them again. Revert to the previous drivers and BIOS settings if they were changed, or use “Restore factory settings” option in the BIOS. Make sure to write down all current BIOS settings that were previously selected, just in case it is required to switch back. If the error is caused by a change of the SATA disk controller’s mode in the BIOS or firmware, the fix can be as simple as entering the BIOS and toggling the SATA controller’s “mode” setting. The exact instructions differ from one manufacturer to the other, but the options will resemble what is shown in the screenshots below.

To check the boot order, follow these steps:

    1. Restart the computer
    2. Press the necessary key to open BIOS menu. This key depends on the computer manufacturer and computer model. This is usually listed on the first screen that appears on the monitor. It can be any of the following: Esc, Del, F2, F8, F10 or F12.
    3. If the screen shows multiple keys, find the key to open “BIOS”, “setup” or “BIOS menu”
    4. Attempt to toggle between all three (or more) modes until a combination that results in Windows booting successfully once more is found.

BIOS loading screen

Notice the key guide in the top-right corner

BIOS configuration screen

BIOS configuration screen

Fix #6: Check your disk with CHKDSK utility

If the hard drive has its file integrity compromised, it is possible to use built-in Windows CHKDSK utility to scan the disk and fix the file system errors.

Here are the steps to run CHKDSK:

  1. Boot from your Windows install disc
  2. Click on Repair your computer after selecting proper language, time and keyboard input.
  3. Select the Windows installation drive, which is usually C:\, and click Next
  4. Choose Command Prompt when the System Recovery Options box appears
  5. Write the following command and press Enter afterwards:
    chkdsk C: /f

    Replace C: with the letter of the driver where Windows is installed.

Here is an example of what the PC’s console output should look like once the chkdsk.exe is complete:

Chkdsk utility results screen

Chkdsk utility results screen

More Information

Linked Entries

  • bootrec
  • Fix MBR

Support Links

  • Easy Recovery Essentials for Windows – our repair and recovery disk.It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and Windows Vista. It’s also available for Windows XP and Windows Server.Read more at Windows Recovery Disks.
  • The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows XP (all editions)
  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows 10 (all editions)

Enable or Disable UAC

Enable or Disable UAC From the Windows Command Line
If you’ve used Windows Vista for more than 3.7 minutes, you know what UAC (User Account Control) is.. it’s the obnoxious, nagging popup window that will be your life for the next 3-5 years unless you switch back to XP in frustration, or to a better OS like… OS X, Suse, Ubuntu, or even XP.
Update: This should also work on Windows 7, 8, 8.1, and probably 8.2. It’ll also work on Windows 10.
Note: Disabling UAC will lead to a less secure system, so be warned.
Windows needs your permission to annoy the crap out of you
There’s a quick way you can enable or disable this annoying window from the command line:
Disable UAC
C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f
Enable UAC
C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 1 /f
After you enable or disable UAC, you will have to reboot your computer for the changes to take effect.
You can also enable or disable this from the Control Panel if you choose.

Add File Attributes options to Context menu in Windows 10/8/7

Add File Attributes options to Context menu in Windows 10/8/7

At times you may get a mistake while attempting to change and spare the substance of a Read-just content document and you never acknowledge it until the word processor itself advises you that you don’t have consents to alter the record substance. Amid such cases, you may ponder, how does Windows separate between a framework document, shrouded record or whether it is a Read-just document. All things considered, this happens because of File Attributes.

Add File Attributes option to Context menu

What are File Attributes in Windows

Every record in Windows contains some metadata connected with it which decides the general framework conduct of that document. These are called File characteristics, and they confer data about the record itself. These qualities have just two conceivable qualities – set or cleared. These resemble a banner which can be turned On/Off.

We have perceived how you can change File Attributes utilizing attrib.exe and investigated Attribute Changer freeware that gives you a chance to do as such in a tick. Today, we’re going to investigate how to add these record ascribes to the standard setting menu, with the goal that you can without much of a stretch control any document by setting or tidying up its traits.

Add File Attributes option to Context menu

You ought to be marked in as an Administrator for adding these document credit alternatives to one side snap setting menu and make it open for every one of the clients on your PC. Additionally, one more essential thing to note here is that you’ll not have the capacity to set/clear the qualities of a record/envelope until you’re an Owner of it. So play alongside just those records for which you’re having Owner consents.

Below is the list of commonly used file attributes and their corresponding bit value.

Commonly used File Attributes in Windows

How to add File Attributes options to Context menu in Windows 10

Let’s take a brief look at what each attribute means:

Read-Only (R): This attribute will prevent other users or programs from making any permanent changes to a file. It comes in handy if you want to set a file as write-protected. However, this flag does not ensure that the file will not be deleted.

Hidden (H): Any file/folder which has this attribute set will be hidden from the normal view. It will only be visible if you bypass the system settings and chose to display all hidden files and folders.

System (S): Setting this attribute ON for any file will make it a system file which can not be modified or deleted. This is how the Operating System configuration files are secured.

Directory (D): Just like LINUX, this attribute is used to differentiate the folders and sub-folders from the files.

Archive (A): This attribute is used to help effectively manage backup and archival of the files. Whenever any changes are made to a backed-up file, this attribute is set to ON so that the backup software can identify such modified files by analyzing their Archive attribute. This helps in taking ‘incremental backup’ of any intended file.

Not Content Indexed (I): If you want any file not to appear the results while using Windows Search functionality, you can set this attribute ON for the file in question. Once set, the file will be skipped when the operating system will search for any content.

Add Set/Clear options for File attributes in Context Menu

We have created a Registry Editor Entry File (.REG) file to help you easily add the file attribute option to context menu where from you can easily set/clear off the individual attributes for any file/folder. If you would want to remove these options from the context menu in future, use the other REG file that removes these registry entries made earlier.

Just download, extract its contents and run the appropriate one with Administrator privileges to add/remove the registry entries. Now, for accessing these options from the context menu, just right-click the desired file/folder and navigate to Attributes menu item in there. Select the option from sub-menu for your intended operation.

How to add File Attributes options to Context menu in Windows 10

Selecting any option from the sub-menu would launch a Command Prompt window for execution of the underlying command.

Below is an example image where I have displayed all attributes for a folder, its subfolder and files as well. A CMD window popped-up displaying all the attributes for the folder.

How to add File Attributes options to Context menu in Windows 10

Hope it works for you!

How to Restore and Back Up Outlook

RESTORE OUTLOOK | GTECHMARTS | SOLVE YOUR COMPUTER ISSUE

Restore and Back Up Outlook

Restore for Outlook 2007 and 2010. They don’t restore the email account information (password, servers, and so on). Luckily, these are relatively easy to recreate from scratch.

So let’s concentrate on backing up and restoring data that’s harder to recreate, like your inbox, calendar, and contacts.

Backing up Outlook is really a simple matter of copying the Outlook folder to a safe location. The hardest part is getting to the folder. And even that’s not particularly difficult.

If you’re using Outlook 2007, select Tools, then Account Settings. For version 2010, click the File tab, then the Info option in the left pane, then Account Settings, and Account Settings again. (Yes, that’s redundant.)

In either version, this will bring you to the Account Settings dialog box, where you should click the Data Files tab. Select your Outlook Data File, then click the Open Folder button (version 2007) or the Open File Location button (2010).

The folder containing your Outlook data will open in Windows Explorer. Return to Outlook, close the Account Settings dialog box, then close Outlook.

Back in Windows Explorer, copy the contents of this folder to a safe location, such as an external hard drive.

That’s it. Outlook is backed up. Now let’s jump ahead to that day you need to restore that data.

After you’ve installed Office, open Outlook, and walk it through the setup wizard.

Once you have Outlook running, start the Import and Export wizard: To do so in Outlook 2007, select File, then Import and Export. In Outlook 2010, click the File tab, the Open option on the left, then the Import option.

Once the wizard is up, select Import from another program or file and click Next.

For the file type, select Personal Folder File (.pst).

After you click Next, click the Browse button and find the backed up Outlook folder. Select the appropriate file (probably Outlook, or Outlook.pst if you have Windows set to show file extensions).

As you go through the rest of the wizard, select Personal Folders, make sure Include subfolders is checked, and click Finish.

Your old data will be restored.

Reset Outlook 2007 to Its Default

Reset Outlook
Reset Outlook

If you use Outlook 2007 to handle emails in your business, you can change its settings, views, tool bars and even menus. This enables you to personalize Outlook and helps you save valuable time when searching for certain items or performing various actions. If you want to restore the original settings, views, menus and tool bars, you need to reset Outlook . The software stores its settings in a configuration file on your hard disk and is able to rebuild this file if it can’t find it. The new configuration file contains only default settings.
Step 1
Close Microsoft Outlook 2007.
Step 2
Click the Start button and select “Computer” from the menu to open the native file manager.
Step 3
Select the system drive — usually “C:” — from the left pane.
Step 4
Open the “Users\UserName\AppData\Roaming\Microsoft\Outlook” folder, where “UserName” is the name of your user account.
Step 5
Right-click the “outcmd.dat” file and select “Rename” from the context menu.
Step 6
Type “outcmd.old” as the new name and press “Enter” to rename the file.
Step 7
Launch Microsoft Outlook 2007, a new outcmd.dat file is automatically created, and all settings are reset to their default values.

CD or DVD drive is not recognized

CD or DVD drive is not seen in File Explorer (called Windows Explorer in Windows 7 and earlier versions of Windows), and the device is marked with a yellow exclamation point in Device Manager. Additionally, after you open the device’s Properties dialog box, one of the following errors is listed in the Device status area:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.

image
The device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
This issue may have occurred after one of the following situations:
You upgrade the Windows operating system.
You install or uninstall CD or DVD recording programs.
You uninstall Microsoft Digital Image.
Resolution 1: Use the Hardware and Devices troubleshooter (Windows 7, Windows 8 and Windows 8.1)
To open the Hardware and Devices troubleshooter, follow these steps:
Press the Windows logo key + R to open the Run dialog box.
Type control in the Run dialog box, then press Enter.
In the Search box in Control Panel, type troubleshooter, and then click Troubleshooting.
Under the Hardware and Sound item, click Configure a device. If you are prompted to enter an administrator password or provide confirmation, type the password or provide confirmation.
If your problem is not solved, try the next resolution.
Resolution 2: Fix corrupted registry entries
Note To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, go to http://support.microsoft.com/gp/admin

Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.

This problem may be caused by two Windows registry entries that have become corrupted. To use Registry Editor to delete the corrupted Registry entries, follow these steps:
Press the Windows logo key + R to open the Run dialog box.
Type regedit in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.

Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 7.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.

Note If you do not see the LowerFilters registry entry, go to the next resolution.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.
If your problem is not solved, try the next resolution.
Resolution 3: Update or reinstall the driver
To update the driver, search for the driver on the device manufacturer’s website, and then follow the installation instructions on the website.

To reinstall the driver, follow these steps:
Press the Windows logo key + R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then click Uninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
After the computer restarts, the drivers will be automatically installed.

If your problem is not solved, try the next resolution.
Resolution 4: Create a registry subkey
Note To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, go to http://support.microsoft.com/gp/admin

Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.

To create the registry subkey, follow these steps:
Press the Windows logo key + R to open the Run box.
Type regedit in the Run box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In the navigation pane, locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
Right-click atapi, point to New, then click Key.
Type Controller0, and then press Enter.
Right-click Controller0, point to New, and then click DWORD(32-bit) Value .
Type EnumDevice1, and then press Enter.
Right-click EnumDevice1, click Modify….
Type 1 in the Value data box, and then click OK.
Exit Registry Editor.
Restart the computer.

TOP 107 COMMAND PROMPT TRICKS

cmd command

Command marked • are Internal commands only available within the CMD shell.
All other commands (not marked with •) are external commands.
External commands may be used under the CMD shell, PowerShell, or directly from START-RUN.

1. Accessibility Controls – access.cpl
2. Accessibility Wizard – accwiz
3. Add Hardware Wizard – hdwwiz.cpl
4. Add/Remove Programs – appwiz.cpl
5. Administrative Tools – control admintools
6. Automatic Updates – wuaucpl.cpl
7. Bluetooth Transfer Wizard – fsquirt
8. Calculator – calc
9. Certificate Manager – certmgr.msc
10. Character Map – charmap
11. Check Disk Utility – chkdsk
12. Clipboard Viewer – clipbrd
13. Command Prompt – cmd
14. Component Services – dcomcnfg
15. Computer Management – compmgmt.msc
16. Control Panel – control
17. Date and Time Properties – timedate.cpl
18. DDE Shares – ddeshare
19. Device Manager – devmgmt.msc
20. Direct X Troubleshooter – dxdiag
21. Disk Cleanup Utility – cleanmgr
22. Disk Defragment – dfrg.msc
23. Disk Management – diskmgmt.msc
24. Disk Partition Manager – diskpart
25. Display Properties – control desktop
26. Display Properties – desk.cpl
27. Dr. Watson System Troubleshooting Utility – drwtsn32
28. Driver Verifier Utility – verifier
29. Event Viewer – eventvwr.msc
30. Files and Settings Transfer Tool – migwiz
31. File Signature Verification Tool – sigverif
32. Findfast – findfast.cpl
33. Firefox – firefox
34. Folders Properties – control folders
35. Fonts – control fonts
36. Fonts Folder – fonts
37. Free Cell Card Game – freecell
38. Game Controllers – joy.cpl
39. Group Policy Editor (for xp professional) – gpedit.msc
40. Hearts Card Game – mshearts
41. Help and Support – helpctr
42. HyperTerminal – hypertrm
43. Iexpress Wizard – iexpress
44. Indexing Service – ciadv.msc
45. Internet Connection Wizard – icwconn1
46. Internet Explorer – iexplore
47. Internet Properties – inetcpl.cpl
48. Keyboard Properties – control keyboard
49. Local Security Settings – secpol.msc
50. Local Users and Groups – lusrmgr.msc
51. Logs You Out Of Windows – logoff
52. Malicious Software Removal Tool – mrt
53. Microsoft Chat – winchat
54. Microsoft Movie Maker – moviemk
55. Microsoft Paint – mspaint
56. Microsoft Syncronization Tool – mobsync
57. Minesweeper Game – winmine
58. Mouse Properties – control mouse
59. Mouse Properties – main.cpl
60. Netmeeting – conf
61. Network Connections – control netconnections
62. Network Connections – ncpa.cpl
63. Network Setup Wizard – netsetup.cpl
64. Notepad – notepad
65. Object Packager – packager
66. ODBC Data Source Administrator – odbccp32.cpl
67. On Screen Keyboard – osk
68. Outlook Express – msimn
69. Paint – pbrush
70. Password Properties – password.cpl
71. Performance Monitor – perfmon.msc
72. Performance Monitor – perfmon
73. Phone and Modem Options – telephon.cpl
74. Phone Dialer – dialer
75. Pinball Game – pinball
76. Power Configuration – powercfg.cpl
77. Printers and Faxes – control printers
78. Printers Folder – printers
79. Regional Settings – intl.cpl
80. Registry Editor – regedit
81. Registry Editor – regedit32
82. Remote Access Phonebook – rasphone
83. Remote Desktop – mstsc
84. Removable Storage – ntmsmgr.msc
85. Removable Storage Operator Requests – ntmsoprq.msc
86. Resultant Set of Policy (for xp professional) – rsop.msc
87. Scanners and Cameras – sticpl.cpl
88. Scheduled Tasks – control schedtasks
89. Security Center – wscui.cpl
90. Services – services.msc
91. Shared Folders – fsmgmt.msc
92. Shuts Down Windows – shutdown
93. Sounds and Audio – mmsys.cpl
94. Spider Solitare Card Game – spider
95. SQL Client Configuration – cliconfg
96. System Configuration Editor – sysedit
97. System Configuration Utility – msconfig
98. System Information – msinfo32
99. System Properties – sysdm.cpl
100. Task Manager – taskmgr
101. TCP Tester – tcptest
102. Telnet Client – telnet
103. User Account Management – nusrmgr.cpl
104. Utility Manager – utilman
105. Windows Address Book – wab
106. Windows Address Book Import Utility – wabmig
107. Windows Explorer – explorer.